Honored Contributor
Honored ContributorHi Dave,
Two more questions: I got as far as page 33. The System Console session works for "figure 13", meaning all the master_write and master_read commands. The next System Console session works for "figure 14". Except the reading and writing of the ram. It appears that the response is overwriting other addresses as well, or the response is always the latest written value. See attached the image of System Console writing and reading to address 0 and 1, with both different values. When I re-read address 0, after I have written to address 1 as well, address 0 returns the value of address 1. I've also attached an image of my sopc system. The second question is: How do I get the tcl prompt as in "figure 15". Or in otherwords: How do I start a quartus_stp session that gives me a tcl prompt. When I type it in a dos-prompt I don't get a tcl prompt. See also an image attached of what I got. Rgds, Kimberleyhttps://www.alteraforum.com/forum/attachment.php?attachmentid=6444 https://www.alteraforum.com/forum/attachment.php?attachmentid=6445 https://www.alteraforum.com/forum/attachment.php?attachmentid=6446
