Forum Discussion

SKuma36's avatar
SKuma36
Icon for Occasional Contributor rankOccasional Contributor
7 years ago

Regarding receiver detection logic in Arria10 Transceiver Native PHY

We are using Arria10 Transceiver PHY configured for 10Gbps data rate. The Transceiver configuration rules has been set to "PCS Direct" and the PMA configuration rules has been set to "BASIC". With th...
CheepinC_altera's avatar
CheepinC_altera
Icon for Regular Contributor rankRegular Contributor
7 years ago

Hi SKuma36,

As I understand it, you have some inquiries related to the receiver detection feature in the A10 XCVR. Please correct me if I am wrong, as I understand it, you are referring to the "Receiver Detection" feature as in the A10 XCVR PHY user guide -> "Table 181. Supported Features for PIPE Configurations". If yes, for your information, the receiver detection feature is only available with PIPE PHY but not Native PHY. Sorry for the inconvenience.

Please let me know if there is any concern. Thank you.

Best regards,

Chee Pin