Forum Discussion
Altera_Forum
Honored Contributor
13 years agoHello again,
in the meantime, i tried another system unseccesfully. In Qsys I took a Clocked Video Input and gave it on a Clocked Video Output, so that i get a loop through. For the settings I take the DVI 1080p60 presets. The Video Clock comes from a PLL and the System Clock is 125MHz from Y4. Anyway I don't get any picture out of my DVI port =( Besides I measured with a scope at measuring point V on the Bitec DVI Card. On the input site, I could see a vertical sync signal. On the output site was nothing... Now I thing that I have overlook something on the board. Thanks for help!