Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

NIOS II design Configuring Stratix II FPGA via PCI

After one builds a design in SOPC builder which includes a Nios II as part for the project. Quartus generates a programming file for the design(SOF) to configure the FPGA via JTAG. The format that Qu...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

Yes, it is under the options setting for the assemble phase of the tools I believe.