Is Random Number Generator available for Max 10 FPGAs?

Question

The "Random Number Generator IP Core User Guide" from Altera website says Max 10 is supported for this IP core.

But I am not able to use this core (Option grayed out on Quartus Prime) on Max 10 device.

I have installed Version 16 of Quartus Prime Lite Edition and I can see the folder of this IP core in my installation folder but can not use it as the option is not visible (grayed out) on IP Catalogue.

altera_forum · Answer

What MAX 10? If it is a 10M0? try a 10M50.

altera_forum · Answer

The IP Guide says it supports MAX10 - see

https://www.altera.com/support/literature/lit-ip.html

I've written a random number generator you can use. Look at the LFSR/PRBS generator document and code here:

https://www.ovro.caltech.edu/~dwh/correlator/cobra_docs.html

https://www.ovro.caltech.edu/~dwh/correlator/pdf/lfsr_tutorial.pdf

https://www.ovro.caltech.edu/~dwh/correlator/pdf/lfsr_tutorial_src.zip

Cheers,

Dave

altera_forum · Answer

Would you happen to know if you could do a random number generator for cyclone 2 on a DE2 board through quartus II?

Forum Discussion

Is Random Number Generator available for Max 10 FPGAs?

3 Replies

Recent Discussions

AGILEX 7 Series I/M – CXL Type 3 IP Validation with Granite Rapids

Regarding MIPI CSI 2 TX

Cyclone 10GX PCIe / Raspberry Pi

Constraints not being picked for DCFIFO

Agilex-7 AXI MCDMA for PCIe hang