Forum Discussion

LLe5's avatar
LLe5
Icon for New Contributor rankNew Contributor
7 years ago

How to simulate MAX10 UFM with Modelsim Altera-Starter Edition? (Quartus Lite 18.0)

I have a testbench running with a UFM instance generated from Platform designer. I have managed to link the fiftyfivenm_unvm to the altera_onchip_flash module, but it is still not working (it is not ...
Rahul_S_Intel1's avatar
Rahul_S_Intel1
Icon for Frequent Contributor rankFrequent Contributor
7 years ago

Hi ,

May I know the error is the below

Error: (vsim-3033) .

if the above error is occurring kindly follow the below

1) Open modelsim, change directory to \test_design\UFM_sys\simulation\mentor

2) Execute => do msim_setup.tcl

3) Run command => ld

4) If using testbench, pls execute example testbench script in the working directory.

do ./../../../ sim.tcl

Regards,

Rs

Stephanie's avatar
Stephanie
Icon for New Contributor rankNew Contributor
5 years ago

I am having a similar issue with the Max10 UFM. I am able to get it to simulate but now the amm_data_readdata is 'XXXXXXXX' when datavalid asserts...