Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Building an OSD with VIP Frame Reader

We're designing an OSD for our monitor project and what we are attempting to do is use a Frame Reader to read out our OSD frame as a single plane, 8 bit pixel. This 8 bit value is then converted to a...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

I tried that as well and the CPS put out an invalid control packet. It got to the end of the packet and asserted EOP then repeated the last 3 words and asserted EOP again.

But the test environment isn't the issue anyways. We still need the Frame Reader to extract our OSD information from RAM, ideally as 8 bit, single plane pixels.