altremote IP

Hi advanced:

FPGA:cyclone iii(EP3C16Q240)

Configuration devic:EPCS64

Configuration MODE:Active Serial

i generate the *.pof by "Convert Programming File" tool, and *.pof contain two *.sof file.

*.sof start address as below:

first.sof start address :0x000000;

second.sof start address:0x080000;

i add the altremote IP into my project for configure second.sof, when i setting Control Register and Reconfigure.

but after setting Control Register and Reconfigure, the FPGA is still working at first.sof.

so how to slove？

PS.attachment file is user_logic.v for control altremote IP