Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Writing to (and reading from) serial configuration device after config is done

Hi there, As part of a remote update scheme I want to be able to read/write to the unused area of the EPCS64 configuration device, as suggested in chapter 12 of the Arria GX handbook. My ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Hi Greg,

You can do it using the EPCS Serial Flash Controller in SOPC Builder. If you're using a NIOS processor then that would be the way to do it.

Cheers