Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

where stroe the pof file if only have cpld

hello! my development board don`t have the epcs* ,noly have a cpld, now i don`t understand how to configure the FPGA with the file of *.pof ? when the board get the power, FPGA can run the i...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

There isn't any EPCS on that board. The FPGA configuration should be stored in the parallel flash instead. If you have a look at the kit documentation, you'll find information on how and where to flash it.

The Max II CPLD is just here for the USB blaster functionality and you don't need to do anything to it.