Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorVoltage on output pin
I have a de2 altera with cyclone ii fpga. When i see the voltage on the oscilloscope of the output pin (expansion header), it is always 3.3 Volts also if i assign in the assignment editor 1.5V, 1....
Altera_ForumHonored Contributor
Honored ContributorYou shold read about i/o standards (http://www.altera.com/literature/hb/cyc2/cyc2_cii5v1_04.pdf)
