Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Viewing Schematic

Hi,

I have the latest wed edition installed on Win8.1 system. In schematic, the text is truncated on module pins or any signal pin. I cannot read the full names on signals. I believe something is out of wack with the fonts. I am at 2560x1440 resolution. Any tips would be appreciated.

5 Replies

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    10 years ago

    --- Quote Start ---

    Hi,

    I have the latest wed edition installed on Win8.1 system. In schematic, the text is truncated on module pins or any signal pin. I cannot read the full names on signals. I believe something is out of wack with the fonts. I am at 2560x1440 resolution. Any tips would be appreciated.

    --- Quote End ---

    Which version of Quartus II are you using? I don't think win 8.1 is officially supported for QII v14.1 and older. Try QII v15.0 as this version officially start supporting win8.1.

    Refer to the link in altera website : https://www.altera.com/support/support-resources/download/os-support.html
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    10 years ago

    Look forward to your sharing on the QII 15 test result. Hope it is a good news.

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    10 years ago

    Have you tried v15? Perhaps you can share the result here for other win8.1 users like us :)