Forum Discussion

steve_ht's avatar
steve_ht
Icon for New Contributor rankNew Contributor
1 year ago

Using MAX V Parallel Flash Loader to configure Xil Artix

I have an already existing project containing Arria V FPGA (with NIOS II soft processor) and a MAX V CPLD as a system controller. In this system an external flash memory is attached to the MAX V cont...
Configuration
Programmable Logic Device
steve_ht's avatar
steve_ht
Icon for New Contributor rankNew Contributor
1 year ago

Yes, adding some glue logic or adapter seems to be feasible. My concerns at this point:

- How will it fit/connect to the same flash memory/PFL already connected to the Arria?

- If I pack the Artix bin as hex into the pof, will it run the configuration process properly for the Artix too?

I just cannot see at this moment how this whole process will run on the during at startup.