Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Using LVDS

Hello, Could anybody please tell me how I can use the HSTC Connectors to communicate between two DE3 Boards? I tried using bidirectional buffers to send/receive data over the pins, but tha...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Did you check, if the correct VCCIO of 2.5 V is activated for the respectiv I/O bank, The DE3 board uses programmable VCCIOs that could be also switched off.