Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

USB BLASTER TROUBLE WITH QUARTUS ii V11.0

I used to work with Quartus 9.1 Web Edition for my designs in VHDL, but reciently I am using Quartus 11.0 WE. I've already installed the driver for my USB Blaster cable, but when I start the programm...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

11.0 sp1 has a fix for this. Until that comes out your best bet is to keep running the 9.1 jtagserver:

  1. Install 11.0 WE, open the programmer window once with admin rights

  2. Install (or have previously installed) an older version

  3. Run the following commands from a command window:

  4. jtagserver --uninstall

  5. <where/you/installed/9.1>/bin

This should get you a working system