Forum Discussion

New Contributor

4 years ago

USB blaster I vs USB blaster II

Hello, I'm totally new here and I'd like to start using Intel MAX 10 family of FPGAs. I was looking for JTAG programmers and I found out that I can use both USB Blaster I (PL-USB-BLASTER-RCN) and US...

JohnT_Altera

Regular Contributor

4 years ago

Hi,

The Max 10 will be able to support up to 24Mhz without any issue. But in case of Signal Integrity issue then we will recommend user to reduce the TCK frequency (https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/solutions/rd06242013_922.html).

For Max 10 design security, it can work on either USB-Blaster or USB-Blaster II.

Forum Discussion

USB blaster I vs USB blaster II

Recent Discussions

Avalon-ST configuration with Agilex 3 fails

Cyclone IV E – PLL Power Track Width Recommendation Clarification

Operating temperature for 10M08DCF256A7G

System PLL of Agliex5 PCIE example design cannot be locked after configuration

Download links not working