Forum Discussion

cosx's avatar
cosx
Icon for Occasional Contributor rankOccasional Contributor
6 years ago

USB blaster connection from DE0 board to windows10

Hi everyone, ​ I came across a very tricky problem. My DE0 board could not connect to windows 10 due to missing drivers. ​ After manually using quartus ii 13.1 usb driver *64 sub folders, still c...
Vicky1's avatar
Vicky1
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi,

May I know which DE0(CV or Nano SOC) board are you using?

Try to install drivers again using steps shown in below,

https://www.intel.com/content/www/us/en/programmable/documentation/nfa1418282998564.html#nfa1426741853388

please refer the solution provided in links below & try at your end,

https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/solutions/rd01082013_514.html

https://forums.intel.com/s/question/0D50P00003yyKUPSA2/windows-10-driver-support-for-usb-blaster-

why don`t you use latest version of Quartus tool(Quartus 18.1 Lite)?

Regards,

Vicky

cosx's avatar
cosx
Icon for Occasional Contributor rankOccasional Contributor
6 years ago

Hi there,

thank you for your help!

The device I use is Cyclone III EP3C16F484.

Quartus 18 does not support DE0 cyclone III series, so I do not use it.

Strangely, my computer supports the driver for DE1 board using Quartus 18, but not the DE0.

Thanks anyway!

Best Wishes,

Mingqiang