Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

uart RS232 communication problem

Hi all, I have cyclone2 dev kit. I tried running uart program given in the Embedded Peripherals pdf but there is no output on the hyperterminal. I have set the baud rate to 9600 and i have changed...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

when i run the program on DE2 to do the ETHERNET test ,I also meet these warnings . NOw i havn't run a program in DE2_demonstrations .