Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

uart RS232 communication problem

Hi all, I have cyclone2 dev kit. I tried running uart program given in the Embedded Peripherals pdf but there is no output on the hyperterminal. I have set the baud rate to 9600 and i have changed...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

The warning says The simulator cannot simulate buttons, LEDs, and other physical things. You can ignore these messages.

have you set the startup type to ROMRAM