Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorTrouble with EMAC on CycloneV SoC
Hello. We use 5CSEBA4U19I7 chip in our devices. And we have a trouble with EMAC. "EMAC0 pin" in Qsys is configured as "FPGA" mode. GMII signals of HPS instance (emac0_phy_txd_o and em...
Altera_ForumHonored Contributor
Honored ContributorI believe this has been addressed in Quartus 14.0
By the way in case you haven't seen this you might find this design example handy: http://rocketboards.org/foswiki/projects/cyclonevrgmiiexampledesign
