Forum Discussion

Icon for New Contributor rank

New Contributor

6 years ago

Solved

Thermal Model for Arria 10 10AS057H3F34I2SG

Hi, I am looking for a Flotherm compatible thermal model for the Arria 10 10AS057H3F34I2SG. Thanks

EngWei_O_Intel
6 years ago
Hi Philip

Attached is the only Flotherm Compatible model of the this package that is available from Engineering. It is a Delphi model and not a compact model similar to what is available for Stratix 10. However, the thermal results should be sufficient since Aria 10 is a single die device.

Thanks.

Eng Wei
10AXSX057_H_F34_DELPHI.rar1 KB

Icon for Frequent Contributor rank

Frequent Contributor

6 years ago

Hi Philip

Link below is the official release of the location where FloTHERM Models reside.

https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/solutions/rd12102012_297.html

But I don't see any A10 model is available. I would need to check further before coming back to you.

Thanks.

Eng Wei

Ziggy
New Contributor
6 years ago
Hi Eng Wei,

Thanks for the reply and looking into this. If you can find out if there is an A10 model available that would be appreciated.

Thanks
- EngWei_O_Intel
  Frequent Contributor
  6 years ago
  Hi Philip
  
  Attached is the only Flotherm Compatible model of the this package that is available from Engineering. It is a Delphi model and not a compact model similar to what is available for Stratix 10. However, the thermal results should be sufficient since Aria 10 is a single die device.
  
  Thanks.
  
  Eng Wei
  10AXSX057_H_F34_DELPHI.rar1 KB
  - Ziggy
    New Contributor
    6 years ago
    Thanks Eng Wei for the support.