Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Testing Verilog design with Matlab

Hi! I have done a design using Quartus II and I need to test it by using Matlab. Is there any way to link Quartus with Matlab?? Thank you. Joan
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

I think you can use a "Black box" simulink block from Altera's DSPbuilder to encapsulate your VHDL/verilog code, then make your matlab code communicate with the HDL via simulink.

I did this once with Xilinx tools and worked great. Altera offers similar functionality.