Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

TCK change leaves USB Blaster II with green LED (MAX3000A)

Last week I programmed over 10 MAX3000A series CPLD's with the Quartus Prime Lite software using the USB Blaster II. I installed the software with the MAX packets and received a PASSED message for e...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

I am currently getting around 7V on my 3.3V Vcc line when the programmer is connected and the board is powered. It is around 1.8V from the programmer when the board is not powered. This is the case for both batches of boards. I feel like the programmer may be the issue.