Forum Discussion

GDeXi's avatar
GDeXi
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Stratix10 muiltboot configuration

I have two image in QSPI flash,both have PCIe funtion, It is hoped that the PCIe will not be hung up during image switching，There is some example design or user guide for provide reference. ...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi De-xin,

When you said about host, is it the processor which is connected to FPGA via PCIe? If it so, it depends. However, if the PCIe address that is recognised by the processor is still the same, i am sure that the host will not fail to recognize the PCIe. Is all depend on host side.

Thank You.

User1574410249703619's avatar
User1574410249703619
Icon for New Contributor rankNew Contributor
5 years ago

Sorry for my expressiveness, thank you for solving my confusion, thank you