Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Stratix V CONF_DONE but no INIT_DONE

Hi everybody, We have a 5SGSED6N3F45 on a custom board that we're trying to configure over JTAG. We can't get the device to finish initialization and enter user mode. The CONF_DONE signal is as...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

It turns out that we had CVP enabled in the device settings. Disabling CVP altogether allowed the device to configure and initialize properly from both the on-board USB blaster II and an off-board USB blaster pod.