Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Stratix III wierd JTAG Config problem

I've got 2 Stratix III devices in a JTAG chain. If I power the board, I can scan the chain OK and program repeatedly but as soon as I switch off the power and re-apply, JTAG no longer works. i...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

JTAG configuration voltage can be 3.3V, but Stratix III I/O voltage must be <= 3.0V.