Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Stratix-III FPP configuration issue with temperature

I configure an Stratix III device from a processor using FPP configuration mode. It works properly at ambient temperature but it fails at 50°C. I would think that it could be a problem of setup or...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

I found the issue and it was not related with FPGA FPP configuration timings but with reading configuration data from a Flash in burst mode. The burst accesses to the Flash where too short and failures were produced when temperature increased.