Forum Discussion
EShum
New Contributor
New ContributorStratix 10 Programming Issue
Hello, We are facing a problem programming S10 via JTAG. Example designs: DDR4 and PCIe AvalonST. Messages: 18950 Device has stopped receiving configuration data. 18948 Error message received fr...
YuanLi_S_Intel
Regular Contributor
Regular ContributorHi Eugene,
There is a known issue which user will have this error message when PCIe and DDR is used in the design. Can you please check if reference clock is supplied appropriately to this IP?
https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/component/2018/error-18948---error-message-received-from-device--detected-inter.html
Regards,
YL
EShumReference clock is supplied in DDR4 design.
Blinking LED design failed at 12% with JTAG errors:
Previous errors were at 9%.
We are using SN74AVC4T245PW level translator as a protection buffer.
Programming hardware: USB ByteBlaster.
