Forum Discussion

BeB's avatar
BeB
Icon for Occasional Contributor rankOccasional Contributor
5 years ago
Solved

Stratix 10 L-Tile Native PHY Reset Controller

Hello, I am using a Stratix 10 SX280LN3. To reset the PHY transmitter, the L-Tile Native PHY user guide recommends to "deassert tx_analogreset after the device enters user mode for a minimum durati...
  • CheepinC_altera's avatar
    CheepinC_altera
    5 years ago

    Hi,


    Thanks for your update. For your information, I do not have further insight into how internally the hardware handle the 2ms. Sorry for the inconvenience. However, based on my experience, generally users will use the reset controller to ensure correct functionality of the transceiver. Therefore, it is recommended for you to use the reset controller.


    Please let me know if there is any concern. Thank you.



CheepinC_altera's avatar
CheepinC_altera
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,


Thanks for your update. For your information, I do not have further insight into how internally the hardware handle the 2ms. Sorry for the inconvenience. However, based on my experience, generally users will use the reset controller to ensure correct functionality of the transceiver. Therefore, it is recommended for you to use the reset controller.


Please let me know if there is any concern. Thank you.