Forum Discussion

Eduard_B_Intel's avatar
Eduard_B_Intel
Icon for New Contributor rankNew Contributor
7 years ago

Stratix 10 GX setup issues

Hello, Please, help! Brand new Stratix 10 GX board is not recognised as a PCIe device. Linux lspci doesn't show the device when device is plugged into ePCI slot. BTS(Board Test System) doesn't see...
Eduard_B_Intel's avatar
Eduard_B_Intel
Icon for New Contributor rankNew Contributor
7 years ago

Hi,

Thank you for the suggestions. The thing is that I can't program the device. When I run BTS it complains that "FPGA is not detected in the Jtag chain". Quartus Programmer detects device as 5M2210Z, but refuses to program it with bts_pcie.sof from BTS installation with this errors in its status window: "Error(18591): Can't recognize the Flash device that attached to device 1. The Flash device is not supported by Quartus Prime software.

" and "Error(210009): Device 1SG280LU3F50S1 is not supported ".