Forum Discussion

Balasubramani's avatar
Balasubramani
Icon for New Contributor rankNew Contributor
2 years ago

Stratix 10 Configuration Issue

Hi, We are facing a issue while configuring Stratix10 FPGA ( Smart VID variant) from JTAG Port We have a fixed failure, failing at 9% always while loading sof file. The same architecture is bei...
Balasubramani's avatar
Balasubramani
Icon for New Contributor rankNew Contributor
2 years ago

Hi,

Thank you sharing the information

We have set the N value to be -12 and set different slave address ( 0x4F, 0x47), but didn't work, we get the same reply as "Incorrect VID Settings"

Kindly let me know if it could be due to Quartus Prime version