Forum Discussion

Balasubramani's avatar
Balasubramani
Icon for New Contributor rankNew Contributor
3 years ago

Stratix 10 Configuration Issue

Hi, We are facing a issue while configuring Stratix10 FPGA ( Smart VID variant) from JTAG Port We have a fixed failure, failing at 9% always while loading sof file. The same architecture is bei...
WZ2's avatar
WZ2
Icon for Frequent Contributor rankFrequent Contributor
3 years ago

Hi there,

Sorry for the delay due to public holidays.

Normally, the PMBUS parameters should be provided by the Voltage regulator manufacturer (AD). Except for N, the slave address should also be changed according to your circuit design (LTM4680 characteristics).

Best regards,

WZ


Recent Discussions