SPI communication between altera DE2 and SD card using Quartus 9.0

Question

Hello, I want to implement embed_lab9 (ftp://ftp.altera.com/up/pub/altera_material/11.0/laboratory_exercises/embedded_systems/de1/embed_lab9.pdf) of altera using altera DE2 board and I have quartus version 9.0 which doesn't have Qsys component . Can somebody please help me in doing it using SOPC builder. Can somebody please upload its entire core (verilog) with it's nios driver   if someone have them? because I am new to Altera boards.Thank you.

altera_forum · Answer

I can help you with an alternative which is VHDL code:  https://github.com/aerlinger/embeddedsysfinalproject/blob/master/vhdl/de2_top.vhd

altera_forum · Answer

https://github.com/aerlinger/embeddedsysfinalproject/blob/master/vhdl/de2_top.vhd

--- Quote End ---

Thank you so much for reply but can you please tell me that is this code meant for SPI communication. Because I am unable to completely understand this code :confused: Thanks once again.

Forum Discussion

SPI communication between altera DE2 and SD card using Quartus 9.0

2 Replies

Recent Discussions

Agilex 7 F Series Transceiver Pins Allowed Voltages During Powerup/When Unpowered

MAX10 Soft SERDES set_input_delay constraints

MAX10 1.8V LVDS Output before, during, after configuration driving LVDS 1.5V VCCIO Inputs

Cyclone 10 LP Error Detection Timing

QSPI DDR Interface with Cyclone10LP: Maximum frequency