solder composition and reflow profile for Cyclone V

Question

For the Cyclone V,  5CEFA7U19I7N: What is the material composition of the BGA balls, and what is the recommended solder reflow profile?

nuraiman_m_intel · Accepted Answer

Hi,Thank you for contacting Intel community.For process reflow, kindly refer to the link below:https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/an/an353.pdfThanks.Regards,Aiman

Forum Discussion

solder composition and reflow profile for Cyclone V

1 Reply

Recent Discussions

Asynchronous FIFO and discontinuous write clock

Using Clocklock+Clockboost on EPF10K100GC503-3DX with Quartus 9.0SP2. How?

Arria 10: Remote Update Watchdog unpredicted behavior

Estimate the power consumption of the MAX 10 device 10M08SLV81I7G

[USB-Blaster] Detected as "USB-Blaster Variant" on SLES12 – Causing Detection Issues