Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributorsmoothing PLL output
Hi all I'm using a PLL on a cyclone III device to generate an 12.228 MHz clock from a 19.2 MHz input. the output clock is a square wave which causes harmonics that interferes with an RF appli...
Altera_ForumHonored Contributor
Honored Contributorwhen I tried adding a series resistor without calibration to 3.3V LVTTL I've received an error message, I only managed it with 3.0V standard.
using the series resistor with calibration will require another round of board editing...
