Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

simulation with modelsim after quartus II vhdl design

Hi, I have been wanting to verify the correct operation of my vhdl design file in quartus II (to be used on a caen v1495 VME board). I have succesfully compiled the quartus II project with t...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Hi Dave,

I think my problem is that when I drag and drop the output signals into the waveform viewing window it says - no data -. Perhaps I am missing some fundamental link between the inputs and the outputs.

I have attached a zip file with my project, coin_reference is the main file which is adapted from caen's reference design for the v1495.