Forum Discussion
amildm
Contributor
ContributorSignalTap -> how to re-define the device chain (auto-detect doesn't work well)?
Hi All,
The FPGA devices in the JTAG chain on my board are not auto-detected correctly.
In Quartus Programmer, besides an auto-detection of the devices, there is an option to choose the devices ...
Re-installing the Quartus on the new OS solved the problem, so thank you for your support.
paveetirrasrie_Altera
Frequent Contributor
Frequent ContributorHi amildm,
Just wanted to check with you, is your concern has been addressed?
If yes , kindly do let me know.
Thank You
amildmRe-installing the Quartus on the new OS solved the problem, so thank you for your support.
