Forum Discussion

Yt_aem's avatar
Yt_aem
Icon for New Contributor rankNew Contributor
3 years ago

Signal Tap Start-up failure

Hi, I am using Quartus Prime Pro 19.1 and device is Cyclone 10GX150. Using SFL to program the device is successful over the JTAG (See attached SFL.png). But, when opening the Signal Tap, it keep...
RichardT_altera's avatar
RichardT_altera
Icon for Super Contributor rankSuper Contributor
3 years ago

This may be the root cause. Do you have the OS information for both machine?