Forum Discussion

Rk_Athram's avatar
Rk_Athram
Icon for Occasional Contributor rankOccasional Contributor
3 years ago

signal tap data error when depth increased more than 512b

Hi, i am facing data corruption when depth is increased to more than 512. i am adding signals which are having a maximum width of 132,128 and 160 with a depth of 512. If i increase t...
sstrell's avatar
sstrell
Icon for Super Contributor rankSuper Contributor
3 years ago

Is your design meeting timing? 250MHz is a pretty fast sampling rate for this. If your design is not meeting timing or you have not fully constrained it for timing, I could see that causing data corruption.