Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Sending Avalon ST to FPGA pins

Hello,

We are using the frame buffer in our SOPC builder system.

It is required to take the output of the frame buffer (data and control -avalon sT video-) on FPGA pins; so as to be taken to another embedded system.

Do any one knows one of the Altera's IP that performs this function.

Thanks in advance

1 Reply

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    15 years ago

    I think you'll have to make your own component, with an avalon sink and an avalon source interfaces. Just connect the two of them in your code, and in the SOPC component creator, declare the source interface as a conduit. It will be mapped as pins on the SOPC system.