Forum Discussion

Honored Contributor

8 years ago

sending 64 bit from fpga to hs to terminal in pc @10k

hi, i had a terasic sockit (which had a cyclone 5 soc). i already implemented sending 64 bit data from fpga to pc by using nios2 processor ( nios2+jtag uart_onchipram). but its speeed is very ...

Altera_Forum

Honored Contributor

8 years ago

Hi dipin555,

You can obtain many useful information on booting Linux using HPS at rocketboards.org.

For example, here are instructions on booting Linux using precompiled binaries on SD Card on the Arrow SoC kit (same as Terasic Cyclone V SoC kit):

https://rocketboards.org/foswiki/documentation/arrowsockitevaluationboard160linuxgettingstarted

Regards,

ccthum

(This message was posted on behalf of Intel Corporation)

Forum Discussion

sending 64 bit from fpga to hs to terminal in pc @10k

Recent Discussions

Avalon-ST configuration with Agilex 3 fails

Cyclone IV E – PLL Power Track Width Recommendation Clarification

Operating temperature for 10M08DCF256A7G

System PLL of Agliex5 PCIE example design cannot be locked after configuration

Download links not working