Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Remote update controller issue

Hi everyone, I'm using the remote update controller (cyclone III) on my Cyclone IV GX dev board with a EPCS128 flash memory. I wish to have two firmwares in my EPCS (factory and application)....
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Cannot find anything wrong in your changes. You should be able to change image address to 0x00600000.

I have tested the bootloader code with Quartus/SOPC Builder 12.1 and that worked.

I have also been using older versions of the compiled bootloader code on newer Quartus versions without problems.