Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Remote update controller issue

Hi everyone, I'm using the remote update controller (cyclone III) on my Cyclone IV GX dev board with a EPCS128 flash memory. I wish to have two firmwares in my EPCS (factory and application)....
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

I have not worked on this for a while and I am not sure, but:

1) The size of the code is less than 1024 bytes (see comments in code) and probably it must fit to a 1024 byte boundary.

2) Yes, the bootloader shall point on the configuration image, not the software.