Forum Discussion

Bachan's avatar
Bachan
Icon for New Contributor rankNew Contributor
25 days ago

Requesting you to resolve the programming on Cyclone V SX SoC Development Kit

Board: Cyclone V SX SoC Development Kit FPGA: 5CSXFC6D6F31 Quartus: Prime Lite 20.1 (Windows 11) JTAG Cable: USB-Blaster II Observed JTAG devices:   SOCVHPS   5M1270ZF324 Expected device missi...
Configuration
Bachan's avatar
Bachan
Icon for New Contributor rankNew Contributor
21 days ago

thank you for the response,

 I have checked for SW4 = off, off, on, off.it is showing the 5M1270, SOCVHPS and if I click auto detect, it is asking for select the device, I have selected(5CSXFC6D6) and confirm it. I have checked the JP6+JP7.

after that,               

I have done this, FPGA only should be SW4=on, off, on, on. I clicked on the auto detect, then it is showing this below error,

unable to scan device chain. can't scan JTAG chain.do you want to open the JTAG chain debugger to troubleshoot the JTAG chain?

 

can you please tell me what I have to do further.

 

Best regards,

Bachan

FakhrulA_altera's avatar
FakhrulA_altera
Icon for Regular Contributor rankRegular Contributor
7 days ago

As we haven't received a response to our previous notification, this thread will be transitioned to community support. We hope all your concerns have been addressed. If you have any new questions, please feel free to open a new thread to receive support from Intel experts. Otherwise, community users will continue to assist you here. Thank you.