Forum Discussion
Rog
New Contributor
New ContributorFPGA support files for openvino?
Hi, I have been given a IEI Mustang F100 with a GX660 fpga to examine, I can only see the Fpga support files (sof & aocx) for the GX115 variant. Can someone please point me to the files for the GX6...
BoonBengT_Altera
Moderator
ModeratorHi @Rog,
Just some updates, after checking internally understand that as mustang devices are collaboration product with IEI, hence more details on the product might be available from IEI itself as Intel would have limited access to those information which we can only provide a best effort support.
Hence would suggest to post the similar question with the IEI support to clarify on this.
Hope that clarify.
Best Wishes
BB
RogNew Contributor
New ContributorHi BB,
Thanks for getting back to me.
I had already done as you suggested, and it does not look like the manufacturer will be able to assist me.
I understand what you say about support being available only on a best effort basis, so if you were able to provide me with the quartus project files for the gx660 variant I would be more than happy to build the files myself.
I already tried to rebuild the project using the gx115 files, but all of the IP is locked to the gx115 version, so this wasn't possible for me.
I would very much appreciate your assistance here.
Thanks for getting back to me.
I had already done as you suggested, and it does not look like the manufacturer will be able to assist me.
I understand what you say about support being available only on a best effort basis, so if you were able to provide me with the quartus project files for the gx660 variant I would be more than happy to build the files myself.
I already tried to rebuild the project using the gx115 files, but all of the IP is locked to the gx115 version, so this wasn't possible for me.
I would very much appreciate your assistance here.
