Cyclone V SoC FPGA boot from QSPI。

I build a barematel program.I want boot this from QSPI flash. It can run well at DE1-SOC development board. BUT at our own PCB, it stop when HPS write FPGA PIO. Is it a boot problem? I stop ...

Eliath_G_Intel
5 years ago
Hi!,

Hoping you're doing well , please take a look at the following tutorial/documentation about how to boot from QSPI for Cyclone V and the Documentation for building your Bare-metal project properly.

https://rocketboards.org/foswiki/Documentation/BuildingBootloader#Cyclone_V_SoC_45_Boot_from_QSPI

https://rocketboards.org/foswiki/Documentation/SoCEDS#Cyclone_V_Bare_Metal_Example_Using_SoC_EDS_Standard_Edition

regards,

Forum Discussion

Cyclone V SoC FPGA boot from QSPI。

Recent Discussions

Avalon-ST configuration with Agilex 3 fails

Cyclone IV E – PLL Power Track Width Recommendation Clarification

JTAG Chain Broken on Agilex 7-I Dev Kit

Question

Quartus Prime Pro 25.1 fatal error during fitter: Windows "Efficiency mode" required