Forum Discussion

AlexHalf's avatar
AlexHalf
Icon for New Contributor rankNew Contributor
1 year ago

CONF_DONE pin failed to go high problem

Hello I am using EP4CGX150CF23C8N FPGA. Configuration is done in AS mode from EPCQ128ASI16N flash. All I/O banks are 3.3V. FPGA initial programming done through JTAG with Terasic USB blaster. Attach...
Configuration
ArleyHenrique's avatar
ArleyHenrique
Icon for New Contributor rankNew Contributor
11 months ago

Hi Dear,

Could you please share the solution?

Regards,

Arley

HAlex's avatar
HAlex
Icon for Occasional Contributor rankOccasional Contributor
11 months ago

Hello

Nothing new to share.

The problems occurred only on 2 boards and not reproduced anymore. Mayb had a local problem with USB blaster or power supply ?

Best regards

Alex