Forum Discussion

Richard_P's avatar
Richard_P
Icon for New Contributor rankNew Contributor
2 years ago

Cannot Erase or Program QSPI Flash for Arria 10 Custom Board

Hi, I am in the process of trying to bring up a custom Arria 10 board. Specifically, I am at the point where I need to program a boot image into the attached QSPI flash module (Micron MT25QU02G) usi...
Configuration
mabdrahi's avatar
mabdrahi
Icon for Contributor rankContributor
2 years ago

Hi Richard,


Actually i have tried at my end, but i dont see the same thing as yours.

It might your custom board have design issue.


Can you recheck and compare Aria 10 devkit versus your design and also circuit.


Thank you,

Aliff