Forum Discussion

Spoder's avatar
Spoder
Icon for New Contributor rankNew Contributor
1 year ago

Quartus II Lite edition is not recognizing Cyclone IV EP4CE6 board

Quartus isn't showing any devices in Hardware setup. I know the computer knows it's connected because it shows up in Settings and Device Manager, I've also uninstalled and reinstalled the USB Blaster...
Configuration
FvM's avatar
FvM
Icon for Super Contributor rankSuper Contributor
1 year ago

Hi,
do you have a complete specification of the development board? I don't know an EP4CE6 board with embedded USB-Blaster. May be there's a compatibility problem, e.g. non-FTDI USB-Bridge.

I expected info like below under driver details:

I wonder what "Remote Local Server" is. I don't have it under Windows 10.

  • Spoder's avatar
    Spoder
    Icon for New Contributor rankNew Contributor
    1 year ago

    Hi, it's a EP4CE6E22C8N board, it looks like this:

    I'm not sure if what I said about "embedded JTAG" is correct, I'm sorry, I'm new to this. But, it comes with a USB Blaster cable to connect to the computer.

    About the driver:

    I should also add that the USB Blaster and the board itself works fine, as I've already tested it on another computer.