PS(Passive Serial) configuration with third part Microprocessor

Hi, Aiman

We can know PFL IP help Uncompressed Data , the information come from Figure 13 and 14 in Parallel Flash Loader Intel® FPGA IPUser Guide.

https://www.intel.com/content/www/us/en/docs/programmable/683698/21-1-19-1-0/using-enhanced-bitstream-compression.html

Before genarateing configuration data in .hex , we can do some setting device and pin options in quartus.

But, I don't have PFL IP. Does the setting have to be adjusting ?

For example, there is a option called '' Generate compressed bitstreams'' , if I enable it?

Thanks